Local Pickup/ Collections of Orders are available on Friday Mornings between 9am and 1pm ONLY. Local Deliveries are scheduled for a Friday Afternoon ONLY No additional collection times are available. As of Friday 3rd May 2024, all pickups will be from our new office at 1/2-4 Byre Avenue, Somerton Park.
TECH-DRY EARTH BONDING EMULSION has been specifically formulated to dust seal and strengthen the internal surfaces of earth structures. The product is designed to penetrate into the capillaries of earth surfaces providing the substrate with dust-sealing effects. A diluted solution of EARTH BONDING EMULSION is used to dustproof and strengthen the surfaces of friable earth structures to increase the abrasion resistance of walls. The treatment will not significantly change the surface appearance and the vapour permeability of the earth buildings. However, a slight sheen or darkening of the surface may occur for some earth structures. EARTH BONDING EMULSION can also be used as an admixture in mud renders to increase the strength and adhesion of the mud render significantly.
Must be diluted with water before use.
Features
Penetrates into the masonry substrate surface with no peel or blister
Provides dust-sealing and surface abrasion-resistant effect
Does not significantly change the surface appearance and vapour permeability.
Improve strength, flexibility and adhesion of earth render if used in the render.
Easy application and cost-effective.
Water-based non-toxic formulation
Sizes 5L and 20L Containers
Application: Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface and the degree of dust sealing required.
Water-Based
Internal Use Only
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
Tech-Dry® Limestone Emulsion is a neutral, water-based, water-repellent limestone sealer, impregnant and surface binder for permeable Australian limestone.
This limestone formula is non-caustic and user-friendly and is designed to penetrate deeply into the capillaries of limestone surfaces, render the substrate water-repellent, and strengthen the surface. It penetrates deeply into limestone, acting as a limestone sealer and strengthening the substrate.
As a high-quality limestone sealer from Tech-Dry®, it significantly reduces the absorption of water or other water-borne staining materials, which are major factors in the deterioration of limestone buildings. Unlike other limestone sealers, the treatment with this limestone sealer will not significantly change the appearance and the vapour permeability of the limestone substrate.
FEATURES:
Water-based emulsion with no volatile hydrocarbon solvents
Penetrates deeply into the limestone surface
Bonds to the substrate with no peel or blister and provides surface dust binding
UV, alkali stable and durable limestone formula
No change to limestone surface appearance and vapour permeability
Non-caustic and user-friendly formula
For more information, download the Tech-Dry® Limestone Emulsion data sheet.
EARTHSHIELD is a solvent-based sealer designed to penetrate into the capillaries of earth surfaces providing the substrate with water repellent and dust-sealing effect. EARTHSHIELD penetrates into the first few millimetres of the surface, providing excellent waterproof and dust sealing to the loose surface without significantly affecting the surface appearance and vapour permeability. It reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in earth-building materials. Impregnation with EARTHSHIELD also prevents surface abrasion of the earth structures. EARTHSHIELD is suitable for all types of earth structures, including mud brick, pressed mud brick, straw-bale, cement-stabilised earth and rammed earth structures. It is best used for exterior walls or rendered earth structures but can also be useful for interior walls in wet areas like kitchens and bathrooms.
The treatment will not significantly change the appearance of the earth buildings and the vapour permeability. However, a slight darkening of the surface may occur for some earth structures. EARTHSHIELD is also suitable for other porous masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Provides a dust-sealing effect and prevents surface abrasion.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
5L and 20L Containers
Application: Brush |Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Solvent-BasedExterior / Internal Use
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY EARTH BINDER is an acrylic-based sealer used to dust-seal and strengthen the internal or external surfaces of earth structures. The product penetrates the capillaries of earth substrate surfaces providing the substrate with a dust-sealing effect and surface abrasion resistance. The treatment will not significantly change the surface appearance and the vapour permeability of the earth buildings. However, a slight sheen or darkening of the surface may occur for some earth structures. EARTH BINDER can also be used as a primer before rendering for earth buildings or other porous substrates to strengthen the surface and improve the adhesion of the render. Due to the pure acrylic formation, EARTH BINDER can be used in wet areas such as kitchens and bathrooms. Must be diluted with water before use.
Features:
Water-based non-toxic formulation
Penetrates into the masonry substrate surface with no peel or blister.
Provides dust-sealing and surface abrasion-resistant effects.
Does not significantly change the surface appearance and vapour permeability.
Improves strength and adhesion of earth substrates before rendering.
Easy application and cost-effective
Sizes 5L and 20L Containers
Application: Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface and the degree of dust sealing required.
Water-Based
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY STABILISED EARTH WATER REPELLENT is a sealer designed to penetrate into the capillaries of stabilised earth or rammed earth and render the substrate water-repellent. This water-repellent zone reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in rammed earth structures. The treatment will not significantly change the appearance of the substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Impregnation of STABILISED EARTH WATER REPELLENT to rammed and stabilised earth structures will prevent water damage such as damp walls, formation of cracks due to expansion and shrinkage, erosion, formation of mildew, moss and lichen. It assists in preventing reduced thermal insulation properties and increased heating costs. STABILISED EARTH WATER REPELLENT is also suitable as a water-repellent sealer for other masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes 5L and 20L Containers
Application: Brush | Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Water Based and Solvent Based Available
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY STABILISED EARTH WATER REPELLENT is a sealer designed to penetrate into the capillaries of stabilised earth or rammed earth and render the substrate water-repellent. This water-repellent zone reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in rammed earth structures. The treatment will not significantly change the appearance of the substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Impregnation of STABILISED EARTH WATER REPELLENT to rammed and stabilised earth structures will prevent water damage such as damp walls, formation of cracks due to expansion and shrinkage, erosion, formation of mildew, moss and lichen. It assists in preventing reduced thermal insulation properties and increased heating costs. STABILISED EARTH WATER REPELLENT is also suitable as a water-repellent sealer for other masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes 5L and 20L Containers
Application: Brush | Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Water Based and Solvent Based Available
TECH-DRY STABILISED EARTH WATER REPELLENT is a sealer designed to penetrate into the capillaries of stabilised earth or rammed earth and render the substrate water-repellent. This water-repellent zone reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in rammed earth structures. The treatment will not significantly change the appearance of the substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Impregnation of STABILISED EARTH WATER REPELLENT to rammed and stabilised earth structures will prevent water damage such as damp walls, formation of cracks due to expansion and shrinkage, erosion, formation of mildew, moss and lichen. It assists in preventing reduced thermal insulation properties and increased heating costs. STABILISED EARTH WATER REPELLENT is also suitable as a water-repellent sealer for other masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes 5L and 20L Containers
Application: Brush | Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Water Based and Solvent Based Available
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY MUD BRICK WATER REPELLENT is a solvent-based sealer designed to penetrate into the first few millimetres of the capillaries of mud brick/earth structures and render the substrate water-repellent. This water-repellent zone reduces the absorption of water by up to 90%. It also reduces efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in earth-building materials. MUD BRICK WATER REPELLENT is a non-film-forming sealer, which provides long-lasting protection against weathering without peeling or blistering. The treatment will not significantly change the appearance of the substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates. MUD BRICK WATER REPELLENT Is also suitable as a water-repellent sealer for other substrates, including stabilised earth/rammed earth, natural stones, concrete masonry, bricks, and tiles & grout.
Features
Penetrates into substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
5L and 20L Containers
Application: Brush | Roller | Spray
Coverage: 1 – 10m2 per litre per coat depending on the permeability of the surface.
Solvent Based
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY EARTH BINDER is an acrylic-based sealer used to dust-seal and strengthen the internal or external surfaces of earth structures. The product penetrates the capillaries of earth substrate surfaces providing the substrate with a dust-sealing effect and surface abrasion resistance. The treatment will not significantly change the surface appearance and the vapour permeability of the earth buildings. However, a slight sheen or darkening of the surface may occur for some earth structures. EARTH BINDER can also be used as a primer before rendering for earth buildings or other porous substrates to strengthen the surface and improve the adhesion of the render. Due to the pure acrylic formation, EARTH BINDER can be used in wet areas such as kitchens and bathrooms. Must be diluted with water before use.
Features:
Water-based non-toxic formulation
Penetrates into the masonry substrate surface with no peel or blister.
Provides dust-sealing and surface abrasion-resistant effects.
Does not significantly change the surface appearance and vapour permeability.
Improves strength and adhesion of earth substrates before rendering.
Easy application and cost-effective
Sizes 5L and 20L Containers
Application: Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface and the degree of dust sealing required.
Water-Based
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY EARTH BONDING EMULSION has been specifically formulated to dust seal and strengthen the internal surfaces of earth structures. The product is designed to penetrate into the capillaries of earth surfaces providing the substrate with dust-sealing effects. A diluted solution of EARTH BONDING EMULSION is used to dustproof and strengthen the surfaces of friable earth structures to increase the abrasion resistance of walls. The treatment will not significantly change the surface appearance and the vapour permeability of the earth buildings. However, a slight sheen or darkening of the surface may occur for some earth structures. EARTH BONDING EMULSION can also be used as an admixture in mud renders to increase the strength and adhesion of the mud render significantly.
Must be diluted with water before use.
Features
Penetrates into the masonry substrate surface with no peel or blister
Provides dust-sealing and surface abrasion-resistant effect
Does not significantly change the surface appearance and vapour permeability.
Improve strength, flexibility and adhesion of earth render if used in the render.
Easy application and cost-effective.
Water-based non-toxic formulation
Sizes 5L and 20L Containers
Application: Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface and the degree of dust sealing required.
Water-Based
Internal Use Only
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
EARTHSHIELD is a solvent-based sealer designed to penetrate into the capillaries of earth surfaces providing the substrate with water repellent and dust-sealing effect. EARTHSHIELD penetrates into the first few millimetres of the surface, providing excellent waterproof and dust sealing to the loose surface without significantly affecting the surface appearance and vapour permeability. It reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in earth-building materials. Impregnation with EARTHSHIELD also prevents surface abrasion of the earth structures. EARTHSHIELD is suitable for all types of earth structures, including mud brick, pressed mud brick, straw-bale, cement-stabilised earth and rammed earth structures. It is best used for exterior walls or rendered earth structures but can also be useful for interior walls in wet areas like kitchens and bathrooms.
The treatment will not significantly change the appearance of the earth buildings and the vapour permeability. However, a slight darkening of the surface may occur for some earth structures. EARTHSHIELD is also suitable for other porous masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Provides a dust-sealing effect and prevents surface abrasion.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
5L and 20L Containers
Application: Brush |Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Solvent-BasedExterior / Internal Use
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY STABILISED EARTH WATER REPELLENT is a sealer designed to penetrate into the capillaries of stabilised earth or rammed earth and render the substrate water-repellent. This water-repellent zone reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in rammed earth structures. The treatment will not significantly change the appearance of the substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Impregnation of STABILISED EARTH WATER REPELLENT to rammed and stabilised earth structures will prevent water damage such as damp walls, formation of cracks due to expansion and shrinkage, erosion, formation of mildew, moss and lichen. It assists in preventing reduced thermal insulation properties and increased heating costs. STABILISED EARTH WATER REPELLENT is also suitable as a water-repellent sealer for other masonry substrates, including natural stones, concrete masonry, bricks, and tiles & grout.
Features:
Penetrates into the substrate surface
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes 5L and 20L Containers
Application: Brush | Roller | Spray
Coverage: 1 – 10m2 per litre per coat, depending on the permeability of the surface.
Water Based and Solvent Based Available
