Local Pickup/ Collections of Orders are available on Friday Mornings between 9am and 1pm ONLY. Local Deliveries are scheduled for a Friday Afternoon ONLY No additional collection times are available. As of Friday 3rd May 2024, all pickups will be from our new office at 1/2-4 Byre Avenue, Somerton Park.
TECH-DRY DAMPCOURSE CREAM is a water-based and environmentally friendly non-drip thixotropic silane/siloxane cream, which is an easy-to-use damp-proof course material for masonry walls. The cream contains no organic solvent.
DPC CREAM is an innovative silane/siloxane cream that has been specifically formulated as an easy-to-use damp-proof course material to install a durable siloxane polymer damp course into brickwork or other masonry walls to permanently stop rising damp in masonry walls.
DPC CREAM is designed to be installed into the mortar bed of masonry walls. Once the DPC CREAM is injected into the mortar bed, this thixotropic cream can stay in close contact with the mortar bed and slowly release silane/siloxane into the capillaries of the mortar bed until the cream is completely absorbed into the mortar bed. The cream also penetrates the bricks or other masonry substrates above and below the mortar bed. The silane/siloxane reacts with the mortar bed and the bricks, forming a permanent polysiloxane damp course within the treated wall.
Features:
Australian made product
Water-Based Cream
Easy to install and inexpensive
Suitable for brick and thick masonry walls containing a mortar bed.
300ml Cannisters make it suitable for all sizes of job
Contains more than 80% active silicones
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY DAMPCOURSE CREAM is a water-based and environmentally friendly non-drip thixotropic silane/siloxane cream, which is an easy-to-use damp-proof course material for masonry walls. The cream contains no organic solvent.
DPC CREAM is an innovative silane/siloxane cream that has been specifically formulated as an easy-to-use damp-proof course material to install a durable siloxane polymer damp course into brickwork or other masonry walls to permanently stop salt damp in masonry walls.
DPC CREAM is designed to be installed into the mortar bed of masonry walls. Once the DPC CREAM is injected into the mortar bed, this thixotropic cream can stay in close contact with the mortar bed and slowly release silane/siloxane into the capillaries of the mortar bed until the cream is completely absorbed into the mortar bed. The cream also penetrates the bricks or other masonry substrates above and below the mortar bed. The silane/siloxane reacts with the mortar bed and the bricks, forming a permanent polysiloxane damp course within the treated wall.
Features:
Australian made product
Water-Based Cream
Easy to install and inexpensive
Suitable for brick and thick masonry walls containing a mortar bed.
Available in 5L and 20L Containers.
Contains more than 80% active silicones
Approx 1L per metre (double brick and stone walls)
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
DPC Cream pump applicator for 5 & 20L tubs of damp course cream.
5-litre capacityA Damp Injector Wand included
This pump is not designed for long-term or multiple-job use.
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY DAMP COURSING FLUID is a silane/siloxane-based impregnant specifically formulated to permeate into wet walls. Once impregnated into a course of brickwork, DCF reacts with the minerals present to form a durable polysiloxane damp course which stops rising salt damp. Tech-Dry Damp Coursing Fluid was developed and tested at the Victoria University of Technology Building Protection Science Unit. It has been used in over 30,000 successful damp course installations Australia-wide, both in domestic and commercial properties, as well as some important heritage buildings since 1982.
Features:
Penetrates deeply into bricks, mortar and other masonry substrates.
UV, alkali stable and durable formulation.
Reduces water penetration, salt migration and other water-borne staining.
Non-dangerous, non-corrosive and non-toxic formulation.
Easy application.
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY DAMPCOURSE CREAM is a water-based and environmentally friendly non-drip thixotropic silane/siloxane cream, which is an easy-to-use damp-proof course material for masonry walls. The cream contains no organic solvent.
DPC CREAM is an innovative silane/siloxane cream that has been specifically formulated as an easy-to-use damp-proof course material to install a durable siloxane polymer damp course into brickwork or other masonry walls to permanently stop salt damp in masonry walls.
DPC CREAM is designed to be installed into the mortar bed of masonry walls. Once the DPC CREAM is injected into the mortar bed, this thixotropic cream can stay in close contact with the mortar bed and slowly release silane/siloxane into the capillaries of the mortar bed until the cream is completely absorbed into the mortar bed. The cream also penetrates the bricks or other masonry substrates above and below the mortar bed. The silane/siloxane reacts with the mortar bed and the bricks, forming a permanent polysiloxane damp course within the treated wall.
Features:
Australian made product
Water-Based Cream
Easy to install and inexpensive
Suitable for brick and thick masonry walls containing a mortar bed.
Available in 5L and 20L Containers.
Contains more than 80% active silicones
Approx 1L per metre (double brick and stone walls)
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY DAMP COURSING FLUID is a silane/siloxane-based impregnant specifically formulated to permeate into wet walls. Once impregnated into a course of brickwork, DCF reacts with the minerals present to form a durable polysiloxane damp course which stops rising salt damp. Tech-Dry Damp Coursing Fluid was developed and tested at the Victoria University of Technology Building Protection Science Unit. It has been used in over 30,000 successful damp course installations Australia-wide, both in domestic and commercial properties, as well as some important heritage buildings since 1982.
Features:
Penetrates deeply into bricks, mortar and other masonry substrates.
UV, alkali stable and durable formulation.
Reduces water penetration, salt migration and other water-borne staining.
Non-dangerous, non-corrosive and non-toxic formulation.
Easy application.
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
Tech-Dry Damp Course Applicator Kit is part of the Tech-Dry Dampcoursing system, which makes it easy to deliver the damp course fluid into walls. Each kit contains enough reusable applicators to treat 3m of a single brick wall at one time.
Filling each reservoir with 150ml of Damp Course Fluid is enough to thoroughly saturate one brick thickness of the wall.
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
