Local Pickup/ Collections of Orders are available on Friday Mornings between 9am and 1pm ONLY. Local Deliveries are scheduled for a Friday Afternoon ONLY No additional collection times are available. As of Friday 3rd May 2024, all pickups will be from our new office at 1/2-4 Byre Avenue, Somerton Park.
TECH-DRY PROTECTASEAL W is a general purpose water-based stain-resistant sealer for masonry materials. It is suitable for all masonry materials including natural stones, concrete blocks, pavers/driveways, clay bricks, terracotta, tiles and grouts. Due to being water-based product, PROTECTASEAL W has limited penetration ability in dense substrates so the product may be most suitable for treating permeable masonry substrates. However, PROTECTASEAL W can still provide reasonable water repellence and stain resistance to dense substrates
PROTECTASEAL W is an environmentally friendly product containing no organic solvent and is a good alternative to the solvent-based stain-resistant sealer.
Features:
Good resistance to oil or water-based stains
Reduce water absorption and algae/mould growth
Penetrates and permanently reacts with masonry
Offer durable protection and wearing resistance
Non-film forming natural finishes with no change of surface appearance
Water-based environmentally friendly technology with no VOC
Application: BRUSH | ROLLER | SPRAY
Coverage 2 – 25m2 per coat depending on impregnation depth required.
rotectaseal Enhancer is a penetrating silicone sealer that combines excellent water and stain repellency with a deepening of the colours in the substrate.
Tech-Dry Protectaseal Enhancer produces an aesthetically pleasing finish by highlighting contrasting colours in the substrate. This can be particularly gratifying on concrete pavers, polished concrete, exposed aggregate, honed concrete, ceramic and natural stone tiles.
USE:
Tech-Dry Protectaseal Enhancer is best applied using a low-pressure hand spray. The product can also be applied using a brush or roller.
PROTECTASEAL ENHANCER S is a solvent based version of the sealer and is best suited for hard dense finishes such as in many natural stones and burnished or polished concrete.
Features:
Darkens and enhances surface colour with minimum change of surface texture
Excellent resistance to oil and water-based stains
Reduce water absorption and algae/mould growth
Penetrates and bonds to the masonry substrate
Durable protection and wear resistance
Easy to apply
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
rotectaseal Enhancer is a penetrating silicone sealer that combines excellent water and stain repellency with a deepening of the colours in the substrate.
Tech-Dry Protectaseal Enhancer produces an aesthetically pleasing finish by highlighting contrasting colours in the substrate. This can be particularly gratifying on concrete pavers, polished concrete, exposed aggregate, honed concrete, ceramic and natural stone tiles.
USE:
Tech-Dry Protectaseal Enhancer is best applied using a low-pressure hand spray. The product can also be applied using a brush or roller.
PROTECTASEAL ENHANCER S is a solvent based version of the sealer and is best suited for hard dense finishes such as in many natural stones and burnished or polished concrete.
Features:
Darkens and enhances surface colour with minimum change of surface texture
Excellent resistance to oil and water-based stains
Reduce water absorption and algae/mould growth
Penetrates and bonds to the masonry substrate
Durable protection and wear resistance
Easy to apply
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY TILE & GROUT SEALER is a high-quality silane/siloxane water repellent impregnate for masonry building materials. The product is designed to penetrate deeply into the capillaries of masonry surfaces and render the substrate water-repellent. This water-repellent zone significantly reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials. The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
TILE & GROUT SEALER is recommended as a water-repellent sealer for tiles and grout. Suitable tiles include ceramic or terracotta tiles and concrete or natural stone pavers. It is also suitable for other porous masonry building substrates.
FEATURES:
Penetrates into the masonry substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
500ml, 1L, 5L and 20L Containers
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
TECH-DRY TILE & GROUT SEALER is a high-quality silane/siloxane water repellent impregnate for masonry building materials. The product is designed to penetrate deeply into the capillaries of masonry surfaces and render the substrate water-repellent. This water-repellent zone significantly reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials. The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
TILE & GROUT SEALER is recommended as a water-repellent sealer for tiles and grout. Suitable tiles include ceramic or terracotta tiles and concrete or natural stone pavers. It is also suitable for other porous masonry building substrates.
FEATURES:
Penetrates into the masonry substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
500ml, 1L, 5L and 20L Containers
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
TECH-DRY PROTECTASEAL W is a general purpose water-based stain-resistant sealer for masonry materials. It is suitable for all masonry materials including natural stones, concrete blocks, pavers/driveways, clay bricks, terracotta, tiles and grouts. Due to being water-based product, PROTECTASEAL W has limited penetration ability in dense substrates so the product may be most suitable for treating permeable masonry substrates. However, PROTECTASEAL W can still provide reasonable water repellence and stain resistance to dense substrates
PROTECTASEAL W is an environmentally friendly product containing no organic solvent and is a good alternative to the solvent-based stain-resistant sealer.
Features:
Good resistance to oil or water-based stains
Reduce water absorption and algae/mould growth
Penetrates and permanently reacts with masonry
Offer durable protection and wearing resistance
Non-film forming natural finishes with no change of surface appearance
Water-based environmentally friendly technology with no VOC
Application: BRUSH | ROLLER | SPRAY
Coverage 2 – 25m2 per coat depending on impregnation depth required.
Introducing Protectasilane, the premium silane-based water-repellent impregnant, expertly designed for masonry building materials. Our advanced formula offers deep penetration into masonry surfaces, creating a robust water-repellent layer. This layer significantly minimizes water absorption, efflorescence, and other water-borne staining, crucial for preserving the integrity of masonry materials. With Protectasilane, expect no noticeable alteration in your masonry's appearance or vapour permeability, although some substrates might experience slight darkening.
Key Applications: Ideal for sealing and protecting various masonry substrates, Protectasilane is your go-to solution for concrete, stones, bricks, ceramic tiles, and grout. Key features include:
Deep penetration into masonry surfaces
Permanent, peel-resistant bond
UV and alkali stability for lasting durability
Effective reduction of water penetration and staining
Preservation of original surface appearance and vapour permeability
User-friendly application and cost-efficiency
For best results, always conduct a pre-application test to confirm product suitability.
Application Guidelines: Ensure a successful application by following these steps:
Prepare the surface by cleaning and repairing as needed.
Apply Protectasilane using a brush, roller, or spray, with a preference for saturation flooding.
Apply a thin liquid film for vertical surfaces and flood horizontal surfaces for optimal penetration.
Adjust the number of applications based on substrate permeability.
Avoid splashing on unintended areas and clean up any spills immediately.
Consumption rates vary, so assess your project's needs carefully.
Aftercare: Post-application, allow the surface to dry for full water repellency, which might take up to 7 days. Keep the treated area free from heavy traffic and staining for at least 24 hours.
Pilot Testing and Quality Control: Conduct a pilot test on a small area to ensure product compatibility and desired results.
Product Specifications:
Appearance: Colourless liquid with hydrocarbon solvent odour
Solids Content: <50% by weight
Specific Gravity: 0.79g/ml at 20°C
Solubility in Water: Insoluble
VOC Content: >50%
Flash Point: >61°C
Important Note: Protectasilane is effective against water absorption through capillary action but has limitations under prolonged contact or high pressure.
Handling and Storage: Handle Protectasilane with care, adhering to safety guidelines and storing it properly to maintain its 12-month shelf life.
Packaging Options: Available in various sizes: 5L & 20L
rotectaseal Enhancer is a penetrating silicone sealer that combines excellent water and stain repellency with a deepening of the colours in the substrate.
Tech-Dry Protectaseal Enhancer produces an aesthetically pleasing finish by highlighting contrasting colours in the substrate. This can be particularly gratifying on concrete pavers, polished concrete, exposed aggregate, honed concrete, ceramic and natural stone tiles.
USE:
Tech-Dry Protectaseal Enhancer is best applied using a low-pressure hand spray. The product can also be applied using a brush or roller.
PROTECTASEAL ENHANCER W is an environmentally friendly, water-borne, and low-VOC alternative. It is best suited for more permeable substrates such as concrete pavers, exposed aggregate or honed concrete, concrete block and reconstituted stones
Features:
Darkens and enhances surface colour with minimum change of surface texture
Excellent resistance to oil and water-based stains
Reduce water absorption and algae/mould growth
Penetrates and bonds to the masonry substrate
Durable protection and wear resistance
Easy to apply
Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY TILE & GROUT SEALER is a high-quality silane/siloxane water repellent impregnate for masonry building materials. The product is designed to penetrate deeply into the capillaries of masonry surfaces and render the substrate water-repellent. This water-repellent zone significantly reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials. The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
TILE & GROUT SEALER is recommended as a water-repellent sealer for tiles and grout. Suitable tiles include ceramic or terracotta tiles and concrete or natural stone pavers. It is also suitable for other porous masonry building substrates.
FEATURES:
Penetrates into the masonry substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
500ml, 1L, 5L and 20L Containers
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
Due to their permeable surfaces, masonry building materials can be easily stained by oil, grease, food and dirt, resulting in permanent staining. Coloured masonry paving, such as light-coloured concrete and natural stone pavers, have become more and more popular for outdoor living areas and are easily stained by a variety of staining materials. Tech-Dry stain-proof sealers can be used on a number of surfaces, such as coloured concrete masonry, natural stone, polished masonry and other masonry substrates.
TECH-DRY PROTECTASEAL S is a general-purpose solvent-based stain-resistant sealer for masonry materials. The product is designed to penetrate into the masonry surfaces and render the substrate oil and water-repellent. It provides good stain resistance against the majority of staining materials, including oil, juice, coffee, wine and food.
PROTECTASEAL-S is recommended as a stain-resistant sealer for permeable building materials such as natural stones, concrete pavers, clay bricks, and terracotta tiles. It can also be used for dense or polished substrates depending on substrates. The treatment will not significantly change the appearance and vapour permeability of the masonry.
However, a slight darkening of the surface may occur for some substrates. Features:
Penetrates into masonry substrate surfaces.
Hard-wearing and durable formulation.
Excellent oil/water-repellent and stain-resistant properties.
Does not significantly change the appearance and vapour permeability.
Contains mainly user-friendly alcoholic solvents.
rotectaseal Enhancer is a penetrating silicone sealer that combines excellent water and stain repellency with a deepening of the colours in the substrate.
Tech-Dry Protectaseal Enhancer produces an aesthetically pleasing finish by highlighting contrasting colours in the substrate. This can be particularly gratifying on concrete pavers, polished concrete, exposed aggregate, honed concrete, ceramic and natural stone tiles.
USE:
Tech-Dry Protectaseal Enhancer is best applied using a low-pressure hand spray. The product can also be applied using a brush or roller.
PROTECTASEAL ENHANCER W is an environmentally friendly, water-borne, and low-VOC alternative. It is best suited for more permeable substrates such as concrete pavers, exposed aggregate or honed concrete, concrete block and reconstituted stones
Features:
Darkens and enhances surface colour with minimum change of surface texture
Excellent resistance to oil and water-based stains
Reduce water absorption and algae/mould growth
Penetrates and bonds to the masonry substrate
Durable protection and wear resistance
Easy to apply
TECH-DRY TILE & GROUT SEALER is a high-quality silane/siloxane water repellent impregnate for masonry building materials. The product is designed to penetrate deeply into the capillaries of masonry surfaces and render the substrate water-repellent. This water-repellent zone significantly reduces the absorption of water or efflorescence or other water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials. The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
TILE & GROUT SEALER is recommended as a water-repellent sealer for tiles and grout. Suitable tiles include ceramic or terracotta tiles and concrete or natural stone pavers. It is also suitable for other porous masonry building substrates.
FEATURES:
Penetrates into the masonry substrate surface.
Permanently bonds to the substrate with no peel or blister.
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability.
Easy application and cost-effective.
Sizes
500ml, 1L, 5L and 20L Containers
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
