Local Pickup/ Collections of Orders are available on Friday Mornings between 9am and 1pm ONLY. Local Deliveries are scheduled for a Friday Afternoon ONLY No additional collection times are available. As of Friday 3rd May 2024, all pickups will be from our new office at 1/2-4 Byre Avenue, Somerton Park.
Introducing Protectasilane, the premium silane-based water-repellent impregnant, expertly designed for masonry building materials. Our advanced formula offers deep penetration into masonry surfaces, creating a robust water-repellent layer. This layer significantly minimizes water absorption, efflorescence, and other water-borne staining, crucial for preserving the integrity of masonry materials. With Protectasilane, expect no noticeable alteration in your masonry's appearance or vapour permeability, although some substrates might experience slight darkening.
Key Applications: Ideal for sealing and protecting various masonry substrates, Protectasilane is your go-to solution for concrete, stones, bricks, ceramic tiles, and grout. Key features include:
Deep penetration into masonry surfaces
Permanent, peel-resistant bond
UV and alkali stability for lasting durability
Effective reduction of water penetration and staining
Preservation of original surface appearance and vapour permeability
User-friendly application and cost-efficiency
For best results, always conduct a pre-application test to confirm product suitability.
Application Guidelines: Ensure a successful application by following these steps:
Prepare the surface by cleaning and repairing as needed.
Apply Protectasilane using a brush, roller, or spray, with a preference for saturation flooding.
Apply a thin liquid film for vertical surfaces and flood horizontal surfaces for optimal penetration.
Adjust the number of applications based on substrate permeability.
Avoid splashing on unintended areas and clean up any spills immediately.
Consumption rates vary, so assess your project's needs carefully.
Aftercare: Post-application, allow the surface to dry for full water repellency, which might take up to 7 days. Keep the treated area free from heavy traffic and staining for at least 24 hours.
Pilot Testing and Quality Control: Conduct a pilot test on a small area to ensure product compatibility and desired results.
Product Specifications:
Appearance: Colourless liquid with hydrocarbon solvent odour
Solids Content: <50% by weight
Specific Gravity: 0.79g/ml at 20°C
Solubility in Water: Insoluble
VOC Content: >50%
Flash Point: >61°C
Important Note: Protectasilane is effective against water absorption through capillary action but has limitations under prolonged contact or high pressure.
Handling and Storage: Handle Protectasilane with care, adhering to safety guidelines and storing it properly to maintain its 12-month shelf life.
Packaging Options: Available in various sizes: 5L & 20L
DENSACRETE LITHIUM PREMIUM is an oil and water resistant concrete densification sealer based on lithium silicate technology. DENSACRETE LITHIUM PREMIUM is a non-film forming penetrating sealer that can deeply penetrate, block concrete capillaries and fast react with concrete to form a hard, dust-proof and colour enhanced concrete finish. Apart from concrete densification sealing, DENSACRETE LITHIUM PREMIUM imparts oil and water resistance to the concrete, effectively making it a water and oil-proof concrete finish. Furthermore, a smooth or gloss finish can be achieved by concrete polishing. DENSACRETE LITHIUM PREMIUM will not leave visible residues or efflorescence after the treatment.
Recommended Uses
DENSACRETE LITHIUM PREMIUM is used as an oil and water resistant concrete densification sealer for treating concrete including residential driveways or garage floors, commercial car parks, and factory or warehouse flooring. Applications include treating new and old concrete slabs for strengthening, dust-proofing, and creating oil and water resistance. DENSACRETE LITHIUM PREMIUM provides good resistance against water and oil absorption and reduces oil staining. The sealer may also be used for treating other masonry substrates including sealing natural stone, clay bricks and ceramic tiles. However, a test should be conducted prior to application to determine the suitability of the product for the purpose.
The key features of DENSACRETE LITHIUM PREMIUM include:
Effectively resists water and oil penetration and reduces oil staining
Deeply penetrates and fast reacts with concrete to ensure durable protection
Leaves no visible residues or efflorescence after treatment
Enhances concrete colour without changing the surface characteristics
Ready-to-use or dilute with water before use
Environmentally friendly water-based technology with nil VOC
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY PROTECTACRETE is a general-purpose penetrating sealer for a wide range of masonry building materials. The product is designed to penetrate into the capillaries of masonry surfaces and render the substrate water-repellent. This water-repellent zone reduces the absorption of water, or efflorescence, or water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials.
PROTECTACRETE is recommended as a water-repellent sealer for porous masonry building substrates such as natural stones, concrete blocks & pavers, clay bricks or terracotta, and tiles & grout.The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Features:
Penetrates into the substrate surface.
Permanently bonds to the substrate with no peel or blister
UV, alkali stable and durable formulation.
Reduces water penetration, efflorescence and water-borne staining.
Does not significantly change the surface appearance and vapour permeability
Easy application and cost-effective.
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
Solvent Based
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
TECH-DRY PROTECTACRETE is a general-purpose penetrating sealer for a wide range of masonry building materials. The product is designed to penetrate into the capillaries of masonry surfaces and render the substrate water repellent. This water repellent zone reduces the absorption of water, or efflorescence, or water-borne staining materials, which are responsible for the bulk of the deterioration in masonry building materials.
PROTECTACRETE is recommended as a water repellent sealer for porous masonry building substrates such as natural stones, concrete block & pavers, clay bricks or terracotta, and tiles & grout.The treatment will not significantly change the appearance of the masonry substrates and the vapour permeability. However, a slight darkening of the surface may occur for some substrates.
Features:
Penetrates into the substrate surface. · Permanently bonds to the substrate with no peel or blister. · UV, alkali stable and durable formulation. · Reduces water penetration, efflorescence and water-borne staining. · Does not significantly change the surface appearance and vapour permeability. · Easy application and cost-effective.
Application BRUSH | ROLLER | SPRAY
Coverage 2 – 20m2 per coat, depending on the permeability of the substrate.
Water Based
Please note: If selecting Local Pickup. Our new office is located at 1/2-4 Byre Avenue, Somerton Park, SA 5044. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only. You will notified of when your product is in stock via an SMS. Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.
