Local Pickup/ Collections of Orders are available on Friday Mornings between 9am and 1pm ONLY.
Local Deliveries are scheduled for a Friday Afternoon ONLY
No additional collection times are available.
As of Friday 3rd May 2024, all pickups will be from our new office at 1/2-4 Byre Avenue, Somerton Park.

Admixtures

4 products

  • Tech-Dry Salt Retarder 5L

    My Store Tech-Dry Salt Retarder 5L

    6 in stock

    TECH-DRY SALT RETARDER is a water-repellent admixture that inhibits the transfer of salts into the newly plastered/rendered surface. It is recommended to be used in the render coat after a Tech-Dry Damp Course installation. Using SALT RETARDER in these renders eliminates the need for separate plasticisers and water-proofing additives. SALT RETARDER should be used during the rendering of walls to waterproof/saltproof newly constructed walls and in older walls the after the installation of a Tech-Dry damp-proof course to prevent residual salt and water migration. Features: Reduces salt migration and water absorption by up to 90% Improves workability Dramatically reduces efflorescence Readily dissolves in water Water-Based Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only.  You will notified of when your product is in stock via an SMS.  Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.

    6 in stock

    $70.00

  • Tech-Dry Salt Retarder 20L

    My Store Tech-Dry Salt Retarder 20L

    10 in stock

    TECH-DRY SALT RETARDER is a water-repellent admixture that inhibits the transfer of salts into the newly plastered/rendered surface. It is recommended to be used in the render coat after a Tech-Dry Damp Course installation. Using SALT RETARDER in these renders eliminates the need for separate plasticisers and water-proofing additives. SALT RETARDER should be used during the rendering of walls to waterproof/saltproof newly constructed walls and in older walls the after the installation of a Tech-Dry damp-proof course to prevent residual salt and water migration. Features: Reduces salt migration and water absorption by up to 90% Improves workability Dramatically reduces efflorescence Readily dissolves in water Water-Based Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only.  You will notified of when your product is in stock via an SMS.  Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.

    10 in stock

    $165.00

  • Last stock! Tech-Dry Emulsion KR2 20L

    My Store Tech-Dry Emulsion KR2 20L

    2 in stock

    TECH-DRY EMULSION KR2 is an innovative admixture designed to be used during the manufacture of pressed concrete products including load-bearing blocks; decorative blocks; coloured blocks; and blocks for retaining walls and basements. When EMULSION KR2 is incorporated into pressed concrete products, the permeability to water and the occurrence of unsightly efflorescence is virtually eliminated. The use of EMULSION KR2 enhances the intrinsic quality of pressed concrete products by reducing the damage caused by weathering-related water uptake and efflorescence. Features: Reduces water absorption and efflorescence by over 80%. Product remains permanently bonded to the substrate and cannot be washed out. Does not leave an oily residue on the masonry substrate. Easy to use in any existing processes. The degree of water resistance can be varied by changing the rate of addition. Water-based technology with no hazardous material emitted during use.  Sizes 5L and 20L Containers Application:   Admixture Dosage:   The rate of addition depends on the specific mix design and the level of water repellency required. The usual dosage rate is approximately 0.5 litre of PLASTICURE per tonne (1000kg) of dry mix ingredients. Water Based Please note: If selecting Local Pickup. Our yard is located at 244 Payneham Road, PAYNEHAM, SA 5070. Collection of your product (if in stock) is available between the hours of 9 am and 1 pm on a Friday only.  You will notified of when your product is in stock via an SMS.  Please wait for this message before attending the yard. Local Deliveries will be made on a Friday afternoon.

    2 in stock

    $600.00

  • Tech-Dry Emulsion KR2 5L

    My Store Tech-Dry Emulsion KR2 5L

    Out of stock

    TECH-DRY EMULSION KR2 is an innovative admixture designed to be used during the manufacture of pressed concrete products including load-bearing blocks; decorative blocks; coloured blocks; and blocks for retaining walls and basements. When EMULSION KR2 is incorporated into pressed concrete products, the permeability to water and the occurrence of unsightly efflorescence is virtually eliminated. The use of EMULSION KR2 enhances the intrinsic quality of pressed concrete products by reducing the damage caused by weathering-related water uptake and efflorescence. Features: Reduces water absorption and efflorescence by over 80%. Product remains permanently bonded to the substrate and cannot be washed out. Does not leave an oily residue on the masonry substrate. Easy to use in any existing processes. The degree of water resistance can be varied by changing the rate of addition. Water-based technology with no hazardous material emitted during use.  Sizes 5L and 20L Containers Application:   Admixture Dosage:   The rate of addition depends on the specific mix design and the level of water repellency required. The usual dosage rate is approximately 0.5 litre of PLASTICURE per tonne (1000kg) of dry mix ingredients. Water Based

    Out of stock

    $290.00

Admixtures

Login

Forgot your password?

Don't have an account yet?
Create account